|
|
|
| Robotic LCD / Plasma Mount for 37-63" Displays |
| Item# 4903 |
|
|
|
|
|
Overview
|
- Motorized mount extends, tilts, and swivels to eliminate glare and reflections by remote control
- Fits most flat panel displays with an outside width of 40" - 61" (typically a 37" - 63" diagonal TV)
- Tilts 7°
- up / 20°
- down and swivels 56°
- right to left (42" screen)
- Watch a video of the mount in action
- Only motorized mount with UL certification
Essential Info
Make every seat in your living room the best seat in the house. The Robotic LCD / Plasma Mount sits tight against your wall, but when you use the included universal remote control, you'll be able to extend your 37- to 63-inch plasma or LCD screen up to 12 inches from the wall and tilt & swivel the display for optimal viewing. Move the TV as necessary to eliminate irritating reflections. Click these links to see interactive videos - you can control the mount's motion - viewed from the front or viewed from the side.
Manuals/Software
What's Included
Mount
Remote control
Mounting hardware
Instructions
|
More Info
|
Motorized Mount Extends, Tilts, & SwivelsUse the included IR remote control or an RS232 interface to extend the Robotic LCD / Plasma Mount from your wall and tilt the screen up or down to your specifications. You can also swivel the screen left and right up to 56°. Two preset buttons on the remote let you set up your favorite viewing positions for one-button access. Additional features include an LED display on the control box for TV size and status.
The Robotic LCD / Plasma Mount sets up just like a manual wall mount. You'll appreciate the hidden cable management system, which allows for a clean appearance, and the control box is even removable for easy maintenance. The bellows protects the mechanism from dust & dirt, and keeps inquisitive fingers away from the works.
Flexible Control OptionsThe X-Arm Mount comes with its own universal remote, easily programmed to control your TV, DVD player, VCR, and cable box, by entering the code for each device. If you already have a learning remote, you can teach it the commands to control the mount. Or you can send commands to the mount using your home control software via the RS232 port.
Complete With Everything You NeedNo wasted trips to the hardware store to buy screws that were so conveniently left out. Fear not - this mount comes with all hardware needed to complete the project. Not only are the screws included that hold the mount to the wood studs in the wall, but you also get a wide variety of screws to fit the various brands of flat-screen TVs out there. Note: you will need additional materials to mount in masonry or metal stud walls. Finally, it needs to be mounted on a vertical wall surface - no ceilings.
Easy InstallationInstalling your motorized LCD / plasma mount is made easier by intelligent design. Tape the included full-size template to the wall and center as needed. Locate the studs, drill one hole, and install the wall plate with one screw. Adjust as necessary to level the mount, then drill the remaining mounting holes & install the screws. Hang the mount on the wall plate, bolt the mounting brackets to the TV, hang it, then install the safety clips to finish the job. You'll need two people to lift the mount and the TV. If you'd rather have your robotic mount installed by a professional, click here to find a local certified dealer.
Adapts to Larger or Smaller DisplaysIf your LCD or plasma screen's mounting pattern is between 26" and 34.5" wide, or between 18.5" and 27.5" tall, you'll need an arm extension kit. If the display mounting pattern is less than 21.5" wide, you'll need the crossplate kit.
|
Specifications
|
Specifications | | Manufacturer: | K2 Mounts | | Manufacturer Product No.: | X-ARM | | UPC: | 857085001220 | | Control Inputs: | IR remote control; RS232 port | | Dimensions: | 31.00" x 22.75" x 18.75" (787mm x 578mm x 476mm); remote control: 8.75" x 2.5" x 1.25" | | Weight: | 51 lbs. | | Expansion: | 4.6" collapsed; 12" expanded | | Screen Weight Capacity: | 180 lbs. (81kg) | | Display Compatibility: | Fits most flat panel displays with an outside width 40" - 61" (102cm - 155cm) - usually 37 to 63" diagonal | | Tilt/Swivel Range: | Tilts 7° up / 20° down; swivels 56° right to left (42" screen) | | Power Requirement: | 110 volts AC, 0.5 amp max | | Approvals: | UL and TUV Listed | | Warranty: | 1 year, limited |
Due to excessive weight, Smarthome will add a heavy-item shipping charge to this item. This charge will be reflected in the shipping amount on the check-out page.
|
Images/Video
|
|
|
Reviews
|
|
|
|
|
|